product masthead

J-Guide/T-Bar Locking Rail

J-Guide/T-Bar Locking Rail

Overview

Locking Rails are utilized to support rope locks as well as the index cards used to identify sets.

Key Benefits

  • Benefit #1
  • Benefit #2
  • Benefit #3
  • Benefit #4

Features

  • Rope locks and index cards are mounted on a 3″x 5″x 1/4″ (76.2 mm x 127 mm x 6 mm) formed, pre-punched steel angle
  • Built to withstand a 500 lb. (226.8 kg) per linear foot up load (RWL)
  • Numbered index cards with a safety warning are included. These can be written on using erasable marker or grease pencil.
  • Mounts to the stage floor. Mounting method must be able to withstand the imposed load.
  • Mounting stanchions are located on 5′ (152.4 cm) maximum centers and made from 1/2″ x 3″ (12.7 mm x 76.2 mm) flat bar.
  • An optional reaction bar for use with a portable capstan winch is available.

Options

Product Code Type Set Centers Weight
011-538R6 Single Purchase 6″ (182.9 cm) 18 lb / ft (26.8 kg/m)
011-538R8 Single Purchase 8″ (243.8 cm) 18 lb / ft (26.8 kg/m)
011-538D6 Double Purchase 6″ (182.9 cm) 18 lb / ft (26.8 kg/m)
011-538D8 Double Purchase 8″ (243.8 cm) 18 lb / ft (26.8 kg/m)
011-BAR Reaction Bar 6 lb / ft (8.9 kg/m)

RWL: RWL is maximum load that can be applied to a block which is in “like new” condition and has been properly installed, maintained and operated.

Construction

 

Ordering Information

Please call your Wenger | J.R. Clancy representative so we can thoroughly understand your needs in order to provide the best solution and estimate.