product masthead

PowerLine

PowerLine Shaft Hoist

Overview

The PowerLine is a line shaft hoist, reengineered to reduce size, weight, and cost. PowerLine hoists come in a wide range of speeds (up to 240 fpm (1.2 m/s)) and capacities (up to 2,500 lb (1,184 kg)), making this hoist a versatile performer and excellent choice for retrofits in older buildings and new construction. The modular design allows PowerLine to be easily incorporated into just about any space. Many options available including mechanical or electric secondary brake, load sensing, and cross groove and slack line detectors. J.R. Clancy’s SceneControl consoles make operating your PowerLine easy and precise.

Key Benefits

  • Speed: Up to 240 fpm (1.2 m/s)
  • Travel: Up to 60 ft. (18.3 m)
  • Gross Cap.: Up to 2,500 lbs. (1,134 kg)
  • Max batten length: As required
  • Places only vertical loads on the supporting structure
  • Thousands of configurations to match your specific needs
  • Nearly limitless speed and capacity options
  • A customizable line shaft design that’s strong, efficient and versatile
  • An excellent choice for retrofits in older buildings and new construction
  • ANSI E1.6 COMPLIANT
View Comparison Chart

Controls

PowerLine works with the entire range of J.R. Clancy’s SceneControl family of consoles or push button controls.

Standard Configurations

Base configuration has gear motor with integral brake on one end and centrifugal load brake on other end.

Description Speed/Gross Capacity
Fixed Speed 20 fpm / 1000 lbs. (0.1 m/s / 454 kg)
20 fpm / 1250 lbs. (0.1 m/s / 567 kg)
20 fpm / 1600 lbs. (0.1 m/s / 726 kg)
20 fpm / 2150 lbs. (0.1 m/s / 975 kg)
20 fpm / 2500 lbs. (0.1 m/s / 1134 kg)
Variable Speed 0 – 110 fpm / 1300 lbs. (0 – 0.56 m/s / 590 kg)
0 – 140 fpm / 1950 lbs. (0 – 0.71 m/s / 885 kg)
0 – 240 fpm / 2300 lbs. (0 – 1.2 m/s / 1043 kg)
Options Lift Line Drum Dia. Max Load/Line
Option 1 1/4 in. (6.35 mm) 7-1/2 in. (190 mm) 750 lb. (341 kg)
Option 2 3/16 in. (4.8 mm) 5-1/2 in. (140 mm) 500 lb. (227 kg)

Options:

  • Cross groove and slack line detectors
  • Load cells
  • Position encoder
  • Additional limit switches
  • One motor and brake each end
  • Two motors, one at each end of the hoist
  • SureBrake™ electric brake or overspeed break

PowerLine is available in several, standard configurations and can also be customized to your needs. Contact your Wenger | J.R. Clancy representative to discuss optimal configurations or custom solutions.

Construction

  • PowerLine is customizable to your unique hoisting needs
  • Fixed or variable speed options to meet your performance needs
  • Compact unit doesn’t require wall or wing space and can be mounted upright
  • or underhung on 10 in. (25.4 cm) spacing
  • Simple construction places only vertical loads on the supporting structure
  • without lateral loads
  • Easy to install backbone can be continuous/discontinuous to meet your site
  • conditions
  • Helical/worm or helical/bevel gear boxes can be oriented 4 ways for
  • simple installation in any space
  • High-efficiency green motors meet IEC 60034-30 Efficiency Classes standard

 

Documentation

Literature

 

Ordering Information

Please call your Wenger | J.R. Clancy representative so we can thoroughly understand your needs in order to provide the best solution and estimate.