product masthead

Wire Guide Locking Rail

Wire Guide Locking Rail

Overview

The Wire Grid Locking Rails mount to the stage floor and support the rope locks and index cards used to identify sets.

Key Benefits

  • Benefit #1
  • Benefit #2
  • Benefit #3
  • Benefit #4

Features

  • Two angles are provided to support 855M floor blocks.
  • Rope locks and index cards are mounted on a 3″x 5″x 1/4″ (76.2 mm x 127 mm x 6 mm) formed, pre-punched steel angle.
  • Built to withstand a 500 lb (226.8 kg)per linear foot up load (RWL).
  • Numbered index cards with a safety warning are included. These can be written on using erasable marker or grease pencil.
  • A 4″ (101.6 mm) channel is provided as a lower bumper for counterweight arbors
  • Mounts to the stage floor. Mounting method must be able to withstand the imposed load.
  • Mounting stanchions are located on 5′ (152.4 cm) maximum centers and made from 1/2″x 3″ (12.7 mm x 76.2 mm) flat bar and 3″ (76.2 mm) channel.
  • Double Purchase locking rails include 5/16″(7.9 mm) anchor shackles for hand line tie-offs.

Options

Product Code Type Set Centers Weight
011-518R6 Single Purchase 6″ (182.9 cm) 31 lb / ft (46 kg/m)
011-518R8 Single Purchase 8″ (243.8 cm) 31 lb / ft (46 kg/m)
011-518D6 Double Purchase 6″ (182.9 cm) 31 lb / ft (46 kg/m)
011-518D8 Double Purchase 8″ (243.8 cm) 31 lb / ft (46 kg/m)

RWL: RWL is maximum load that can be applied to a block which is in “like new” condition and has been properly installed, maintained and operated.

Construction

 

Ordering Information

Please call your Wenger | J.R. Clancy representative so we can thoroughly understand your needs in order to provide the best solution and estimate.